2.5" SATA & PATA SSDs

SSD470N & SSD470N-I

Transcend's SSD470N features a SATA III 6Gb/s interface and state-of-the-art 3D NAND technology, which allows 112 layers of 3D NAND flash chips to be vertically stacked. Compared to 3D NAND at 96 layers, this density breakthrough greatly improves storage efficiency. Transcend's SSD470N comes with a powerful controller and a DRAM cache, ensuring data can be written to the flash over extended periods without compromising performance. The SSD470N is fully tested in-house to guarantee reliability in mission-critical applications, boasting an endurance rating of 3K Program/Erase cycles and an extended operating temperature ranging from -20℃~75℃.

Transcend also offers the SSD470N-I with wide temperature (-40℃ ~ 85℃) capabilities to ensure sustained functionality, enhanced endurance and optimal reliability in mission-critical applications.


Firmware Features

  • Dynamic thermal throttling
  • Built-in LDPC ECC (Error Correction Code) functionality
  • Advanced Global Wear-Leveling and Block management for reliability
  • Advanced Garbage Collection
  • Early Move
  • Supports S.M.A.R.T. function to conduct health monitoring, analysis, and reporting for storage devices
  • TRIM command for better performance
  • NCQ command for better performance
  • Full drive encryption with Advanced Encryption Standard (AES) (optional)
  • Power-saving DevSleep (Device Sleep) mode (optional)

Hardware Features

  • Compliant with RoHS 2.0 standards
  • DDR3 DRAM Cache embedded
  • Endurance: 3K P/E cycles (Program/Erase cycles) guaranteed
  • Anti-sulfur technology implemented to prevent sulfurization in the environment
  • Power Shield (PS) to ensure data transfer integrity and minimize data corruption in the drive during an abnormal power outage
  • Extended Temp. (-20°C ~ 75°C) and Wide Temp. (-40°C ~ 85°C) options available

Specifications

Appearance

Dimensions100 mm x 69.85 mm x 6.8 mm (3.94" x 2.75" x 0.27")
Weight54 g (1.9 oz)
Form Factor
  • 2.5"

Interface

Bus Interface
  • SATA III 6Gb/s

Storage

Capacity
  • 1 TB
  • 2 TB
  • 4 TB
Flash Type
  • 112-layer 3D NAND flash

Operating Environment

Operating Voltage
  • 5V±5%
Operating Temperature
  • Standard Temp.
    °C (°F) ~ °C (°F)
  • Extended Temp.
    -20°C (-4°F) ~ 75°C (167°F)
  • Wide Temp.
    -40°C (-40°F) ~ 85°C (185°F)
Storage Temperature-55°C (-67°F) ~ 85°C (185°F)
Humidity5% ~ 95%
Shock
  • 1500 G, 0.5 ms, 3 axis
Vibration (Operating)20 G (peak-to-peak), 7 Hz ~ 2000 Hz (frequency)

Power

Power Consumption (Operation)5.2 watt(s)
Power Consumption (IDLE)0.6 watt(s)

Performance

Sequential Read/Write (CrystalDiskMark)Read: Up to 560 MB/s
Write: Up to 510 MB/s
4K Random Read/Write (IOmeter)Read: Up to 84,000 IOPS
Write: Up to 70,000 IOPS
Mean Time Between Failures (MTBF)3,000,000 hour(s)
Terabytes Written (TBW)Up to 3800 TBW
Drive Writes Per Day (DWPD)1.73 (3 yrs)
Note
  • Speed may vary due to host hardware, software, usage, and storage capacity.
  • The workload used to rate DWPD may be different from your actual workload, which may vary due to host hardware, software, usage, and storage capacity.
  • Terabytes Written (TBW) expresses the endurance under the highest capacity.

Warranty

Certificate
  • CE
  • UKCA
  • FCC
  • BSMI
Warranty
  • Three-year Limited Warranty
Warranty Policy
  • Please click here for more information about the Transcend Warranty Policy.
  • Warranty does not apply when Scope Pro software wear-out indicator displays 0% within the warranty coverage.
  • Due to the complexity and variety of industrial applications, Transcend cannot guarantee 100% compatibility with all platforms and under all scenarios. For special applications and environments, it is strongly suggested that you contact Transcend beforehand for clarification.
  • Scope Pro software is required by request. Please contact us for more information.

Order Information

1TB
  • TS1TSSD470N
  • TS1TSSD470N-I
2TB
  • TS2TSSD470N
  • TS2TSSD470N-I
4TB
  • TS4TSSD470N
  • TS4TSSD470N-I